Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual page 684

JunosE 11.3.x Command Reference Guide N to Z
Mode
642
configuration—Displays the configuration of each controller at the specified level and
above
layerType—Type of SONET/SDH layer
section—Section layer of an interface
line—Line layer of an interface
path—SONET or SDH path
interval—Number of 15-minute intervals over which the router monitors information; a
value in the range 1–96; default value is the current interval, number 1
controllerType—Type of interface or channel
tributary—SONET or SDH virtual tributary
e1—E1 channel over SDH virtual tributary
ds1—T1 channel over SONET/SDH virtual tributary
ds3—T3 over channelized SONET interface
t1—T1 channel on T3 over channelized SONET interface
total—Displays the MIB statistics for all intervals
delta—Displays baselined statistics for all intervals
all—Shows statistics for all time intervals, rather than statistics for selected time
intervals
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.