Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide N to Z
show bgp ipv6 peer-group
Syntax
Release Information
Description
Options
Mode
600
show bgp ipv6
[ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ]
peer-group [ peerGroupName ] [ filter ]
Command introduced before JunosE Release 7.1.0.
route-target signaling keywords added in JunosE Release 8.2.0.
Displays information about BGP peer groups.
unicast—Specifies the IPv6 unicast address family and routing table; the default option
multicast—Specifies the IPv6 multicast address family and routing table
vpnv6 all—Specifies the VPN-IPv6 address family and all IPv6 VPN routing and
forwarding instances
vpn6 vrf vrfName—Specifies the VPN-IPv6 address family and only the IPv6 VPN
routing and forwarding instance with the name vrfName
route-target signaling—Specifies the route-target address family
peerGroupName—Name of the BGP peer group
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 and is the answer not in the manual?
Questions and answers