Show Bridge - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show bridge

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
show bridge { bridgeGroupName | vplsName } [ all [ delta ] ] [ filter ]
Command introduced before JunosE Release 7.1.0.
vplsName variable added in JunosE Release 7.1.0.
Displays configuration and statistics information for the specified bridge group or VPLS
instance.
bridgeGroupName—Name of a bridge group specified with the bridge command
vplsName—Name of a VPLS instance created with the bridge vpls
transport-virtual-router command
all—Displays address table and statistics information for each network interface
assigned to the bridge group or VPLS instance
delta—Displays baselined statistics
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Monitoring VPLS Configuration and Statistics for a Specific VPLS Instance in the JunosE
BGP and MPLS Configuration Guide
Chapter 7: S Commands
609