Privilege - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

privilege

Syntax
Release Information
Description
Options
Mode
268
privilege mode [ all ] level levelValue commandPrefix
no privilege mode [ all ] [ level levelValue ] commandPrefix
Command introduced before JunosE Release 7.1.0.
Assigns a privilege level to the specified command that appears in the specified mode.
The no version sets the privilege level for the command to its default value and displays
the default privilege level in the show configuration output.
NOTE: You must access the CLI at privilege level 15 to view or use this
command. You cannot modify the privilege level of this command.
mode—Mode in which the command appears; for example, User Exec mode, Global
Configuration mode, Router Configuration mode
all—Specifies that this command assigns the specified privilege level to all commands
in the specified mode and/or to all commands that match the specified command
prefix
levelValue—Level, in the range 0–15, at which you want the command to be accessible
commandPrefix—Command prefix that you want to change; can be a partial keyword,
the starting keyword(s) of a command, or a complete command
Global Configuration
Copyright © 2010, Juniper Networks, Inc.