Reference-Rate - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

reference-rate

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
reference-rate refRate
no reference-rate
Command introduced in JunosE Release 8.1.0.
Specifies the reference rate for the policy parameter. The no version sets the reference
rate to the default value.
refRate—Value of reference rate, in the range 0–4294967295, default value is 65536
Policy Parameter Configuration
Policy Rule Precedence
Chapter 6: R Commands
379