Qos-Interface-Parent - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

qos-interface-parent

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
In QoS Interface Set Configuration mode:
[ no ] qos-interface-parent interfaceSupersetName
In QoS Interface Superset Configuration mode:
[ no ] qos-interface-parent interface supersetInterfaceType interfaceSpecifier
In Interface Configuration mode:
[ no ] qos-interface-parent interfaceSetName
Command introduced in JunosE Release 9.2.0.
In QoS Interface Superset Configuration mode, assigns a parent interface for the interface
superset. The parent interface can be an Ethernet major interface, an ATM major interface,
or a LAG. The no version deletes the parent from the superset.
In QoS Interface Set Configuration mode, assigns a QoS interface superset as the parent
for the interface set. The no version deletes the parent from the set.
In Interface Configuration mode, assigns a QoS interface set as the parent for the member
interface. The no version deletes the parent from the interface.
interfaceSupersetName—Name of the QoS interface superset that is the parent of this
interface set
supersetInterfaceType—One of the following superset interface types: fastEthernet,
gigabitEthernet, tenGigabitEthernet, atm, or lag
interfaceSpecifier—Particular interface; format varies according to interface type; see
"Interface Types and Specifiers" on page 5
interfaceSetName—Name of the QoS interface set that is the parent of the interface
Interface Configuration, QoS Interface Set Configuration; QoS Interface Superset
Configuration
Configuring Interface Sets for QoS
Configuring Interface Supersets for QoS
Chapter 5: Q Commands
291