Show Isis Database - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show isis database

Syntax
Release Information
Description
Options
Mode
956
show isis database [ level-1 | level-2 | l1 | l2 | lspid | hostname | detail | verbose ]*
[ filter ]
Command introduced before JunosE Release 7.1.0.
hostname variable added in JunosE Release 7.3.0.
Displays the IS-IS link-state database.
level-1—Displays the IS-IS link-state database for level 1
level-2—Displays the IS-IS link-state database for level 2
l1—Displays the IS-IS link-state database for level 1
l2—Displays the IS-IS link-state database for level 2
lspid—Link-state PDU identifier in the form xxxx.xxxx.xxxx.yy.zz; when specified, displays
the contents of a single link-state PDU by its ID number
hostname—Displays the IS-IS link-state database for the specified hostname
detail—Additionally displays contents of each link-state PDU; if not specified, a summary
display is provided
verbose—Additionally displays MPLS traffic engineering information
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.