Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide N to Z
qos-adaptive-mode
Syntax
Release Information
Description
Mode
290
[ no ] qos-adaptive-mode
Command introduced in JunosE Release 7.2.0.
Enables ANCP to dynamically create QoS parameter instances associated with the ANCP
downstream rate application. ANCP also determines the value the system uses when
recalculating the QoS shaping rate. The values of the parameter instances track the
bandwidth of the local loop that is communicated by ANCP. The no version disables QoS
adaptive mode.
Layer 2 Control Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
