Show Controllers T3 - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show controllers t3

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show controllers t3 [ brief | { interfaceSpecifier [ brief | all | summary ] |
{ ft1 | serial } [ interfaceSpecifier ] } ] [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays information about the T3 controller interfaces.
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
brief—Abbreviated display of T3 controller information
all—Shows statistics for all time intervals, rather than statistics for selected time
intervals
summary—Displays link status summary
ft1—Displays information about fractional T1 subchannels
serial—Displays information about serial interfaces
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Chapter 7: S Commands
645