Neighbor Allowas-In - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

neighbor allowas-in

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
neighbor { ipAddress | ipv6Address | peerGroupName } allowas-in number
no neighbor { ipAddress | ipv6Address | peerGroupName } allowas-in [ number ]
Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
Specifies the number of times that the AS path of a received route may contain the
recipient BGP speaker's AS number and still be accepted. The no version restores the
default state, which is to reject as a loop any route whose path contains the speaker's
AS number. IBGP peers in the VPNv4 address family always accept these routes,
regardless of the command configuration.
ipAddress—IP address of BGP neighbor
ipv6Address—IPv6 address of BGP neighbor
peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using
the peerGroupName argument, all the members of the peer group inherit the
characteristic configured with this command, unless it is overridden for a specific peer.
number—Number in the range 1–10
Router Configuration
Chapter 2: N Commands
27