Send - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

send

Syntax
Release Information
Description
Options
Mode
444
send { * | absoluteLineNumber | console consoleLineNumber | vty vtyLineNumber }
[ message ]
Command introduced before JunosE Release 7.1.0.
Sends a message to one or more terminals. If you begin the message on the same line
as the command, the first character is a delimiter; you must end the message with the
same delimiter. If you begin the message on another line, you must enter Ctrl+z to end
the message. There is no no version.
*—Sends the message to all terminals
absoluteLineNumber—Line number of a terminal to which the message is sent
consoleLineNumber—Line number of a console to which the message is sent
vtyLineNumber—Line number of a vty to which the message is sent
message—Text of message to send; a string of up to 1023 alphanumeric characters
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.