Radius Acct-Session-Id-Format - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

radius acct-session-id-format

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
radius acct-session-id-format { decimal | description }
no radius acct-session-id-format
Command introduced before JunosE Release 7.1.0.
Configures the RADIUS client's use of a specific format for RADIUS attribute 44,
Acct-Session-Id. The no version negates the Acct-Session-Id format.
decimal—Configures the RADIUS client to use a decimal format
description—Configures the RADIUS client to use the generic format:
erx interfaceType interfaceSpecifier:hexNumber
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
hexNumber—Hexadecimal number identifying the session
Global Configuration
Chapter 6: R Commands
309