Show Ip Route - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show ip route

Syntax
Release Information
Description
Options
864
show ip route [ vrf vrfName ] [ destination [ ipMask ] [ detail ] ] [ all ] [ protocol ]
[ filter ]
To display summary information:
show ip route summary [ vrf vrfName ] [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays current state of the routing table.
vrfName—Displays the contents of the IP routing table associated with a VRF
destination—Specifies the IP address or domain name of the host to show
ipMask—IP mask of the specific address to show
detail—Displays detailed information about the specific prefix; currently shows the tag
added by means of the ip route command
all—Displays all routes in the routing table inserted from all protocols (not just the best
routes that are used for forwarding)
protocol—One of the following protocols for which you want to display the best routes
in the routing table; no routes are displayed if routes for the specified protocol are not
present in the routing table
access—Displays the best access-server routes (BGP) in the routing table
access-internal—Displays the best access-internal routes in the routing table
bgp—Displays the best BGP routes in the routing table
bgp-tunnel—Displays the best BGP tunnel routes in the routing table
dvmrp—Displays the best DVMRP routes in the routing table
isis—Displays the best IS-IS routes in the routing table
ldp—Displays the best LDP tunnel routes in the routing table
local—Displays the best locally connected routes in the routing table
mbgp—Displays the best MBGP routes in the routing table
ospf—Displays the best OSPF routes owned by in the routing table
other—Displays the best internal control routes in the routing table
rip—Displays the best RIP routes in the routing table
rsvp—Displays the best RSVP tunnel routes in the routing table
Copyright © 2010, Juniper Networks, Inc.