JunosE 11.3.x Command Reference Guide N to Z
path ds3 description
Syntax
Release Information
Description
Options
Mode
154
path pathChannel ds3 ds3Channel description name
no path pathChannel ds3 ds3Channel description
Command introduced before JunosE Release 7.1.0.
Assigns a text description or an alias to a DS3 signal. This command applies to a DS3
over channelized SONET/SDH interface. Use the show controllers sonet command to
display the text description. The no version removes the description or alias.
pathChannel—Number, in the range 1–2147483648, that identifies the path
ds3Channel—Number, in the range 1–3, that identifies the path
name—Text string or alias of up to 80 characters for the T3 over channelized
SONET/SDH interface
Controller Configuration
Copyright © 2010, Juniper Networks, Inc.