Router-Id - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

router-id

Syntax
Release Information
Description
Options
Mode
406
[ no ] router-id ipAddress
Command introduced before JunosE Release 7.1.0.
Specifies an IP address that the router uses as a router ID for OSPF. The no version forces
OSPF to use the previous OSPF router ID.
ipAddress—IP address that the router uses as a router ID for OSPF.
Router Configuration
Copyright © 2010, Juniper Networks, Inc.