Set Dhcp Relay Agent Sub-Option - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

set dhcp relay agent sub-option

Syntax
Release Information
Description
Options
Mode
480
set dhcp relay agent sub-option { circuit-id | remote-id | vendor-specific
{ layer2-circuit-id | user-packet-class } }
no set dhcp relay agent sub-option { circuit-id | remote-id | vendor-specific
[ layer2-circuit-id | user-packet-class ] }
Command introduced in JunosE Release 8.0.0.
Configures DHCP relay and DHCP relay proxy to add values into the DHCP relay agent
information option (option 82) of the packets sent to a DHCP server. The no version
restores the default configuration, in which the specified values are not relayed to the
DHCP server.
NOTE: We recommend that you use this command for new option 82
suboption configurations. However, JunosE Software continues to support
the set dhcp relay agent command, with option 82 suboptions, to provide
backward-compatibility for existing scripts.
circuit-id—Specifies the Agent Circuit ID suboption (suboption 1)
remote-id—Specifies the Agent Remote ID suboption (suboption 2)
vendor-specific—Specifies the Vendor-Specific suboption (suboption 9)
layer2-circuit-id—Specifies the SVLAN ID or VLAN ID or both for Ethernet interfaces or
the VPI/VCI for ATM 1483 interfaces
user-packet-class—Specifies the user packet class, whose value is configured by the
JunosE Software layer 2 policy application
Global Configuration
Copyright © 2010, Juniper Networks, Inc.