Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide N to Z
radius disconnect client
Syntax
Release Information
Description
Options
Mode
318
[ no ] radius disconnect client ipAddress
Command introduced before JunosE Release 7.1.0.
Configures a RADIUS disconnect client and enters RADIUS Disconnect Configuration
mode. The no version removes the RADIUS disconnect client.
NOTE: This command is deprecated and may be removed completely in a
future release. The function provided by this command has been replaced
by the subscriber disconnect command and the RADIUS dynamic-request
server feature. The RADIUS Disconnect Configuration mode is also
deprecated.
ipAddress—IP address of the RADIUS server that is acting as the disconnect client
Global Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
