Neighbor Route-Reflector-Client - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

neighbor route-reflector-client

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName }
route-reflector-client
Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
Configures a router as a BGP route reflector and configures the specified neighbor as its
client. The no version indicates that the neighbor is not a client. The default version
removes the explicit configuration from the peer or peer group and reestablishes
inheritance of the feature configuration.
ipAddress—IP address of BGP neighbor being identified as a client
ipv6Address—IPv6 address of BGP neighbor being identified as a client
peerGroupName—Name of BGP peer group. If you specify a BGP peer group by using
the peerGroupName argument, all the members of the peer group inherit the
characteristic configured with this command. You cannot override the characteristic
for a specific member of the peer group.
Address Family Configuration, Router Configuration
Chapter 2: N Commands
59