Show Mpls Next-Hop - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show mpls next-hop

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show mpls next-hop [ nextHopIndex ] [ delta ] [ filter ]
Command introduced in JunosE Release 7.1.0.
Displays MPLS next hops and any available next-hop statistics. Next hops can be pointed
to by MPLS forwarding entries on an LSR, IP or IPv6 routes on an LER, and VPLS bridge
groups.
nextHopIndex—Number identifying a next hop, in the range 1–1048575
delta—Displays baselined statistics
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Chapter 7: S Commands
1019