Server-Address - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

server-address

Syntax
Release Information
Description
Options
Mode
448
server-address address
no server-address [ address ]
Command introduced before JunosE Release 7.1.0.
Sets the DHCP server address that is sent to DHCP clients. The no version removes server
address.
address—DHCP server address
DHCP Local Pool Configuration
Copyright © 2010, Juniper Networks, Inc.