Show L2Tp Session - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show l2tp session

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show l2tp session [ detail ] [ state { adminState | ifOperStatus } ]
[ l2tpName | [ virtual-router vrName ] ip ipAddress [ l2tpNameNoDest ] ] [ filter ]
To display summary information:
show l2tp session summary [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays detailed information about selected L2TP sessions or summary information for
all L2TP sessions.
detail—Provides complete information about the specified sessions
state—Restricts display to sessions in a specific state
adminState—Effective administrative state
ifOperStatus—Operational state
l2tpName—Session name
vrName—Name of the virtual router on which the session exists
ipAddress—IP address
l2tpNameNoDest—Name of the session
filter—See Filtering show Commands on page 4
summary—Displays the configured and operational status of all L2TP sessions
Privileged Exec
Chapter 7: S Commands
979