Radius Override Nas-Port-Id Remote-Circuit-Id - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

radius override nas-port-id remote-circuit-id

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
radius override nas-port-id remote-circuit-id
no radius override nas-port-id
Command introduced before JunosE Release 7.1.0.
Configures RADIUS to override the standard use of the NAS-Port-Id [87] RADIUS attribute
and instead use the PPPoE remote circuit ID transmitted from a DSLAM device. The no
version restores the default NAS-Port-Id value, which is the physical interface of the
network access server (NAS) that is authenticating the user.
Global Configuration
Chapter 6: R Commands
337