Show L2Tp Dial-Out Session - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show l2tp dial-out session

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show l2tp dial-out session [ triggerIpAddress | allVirtualRouters ] [ detail ]
[ state operState ] [ filter ]
To display summary information:
show l2tp dial-out session summary [ allVirtualRouters ] [ filter ]
Command introduced before JunosE Release 7.1.0.
Displays the status of L2TP dial-out sessions.
triggerIpAddress—Trigger IP address for the session that you want to display
allVirtualRouters—Displays dial-out information for all virtual routers
detail—Displays configuration, state, and statistics
operState—One of the following operational states:
authenticating
connecting
dormant
failed
inService
inhibited
pending
postInhibited
filter—See Filtering show Commands on page 4
summary—Displays aggregate counts for dial-out sessions in each of the possible
operational and administrative states
Privileged Exec
Chapter 7: S Commands
975