path ds3 t1 remote-loopback
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] path pathChannel ds3 ds3Channel t1 t1Channel remote-loopback
Command introduced before JunosE Release 7.1.0.
Enables acceptance of remote loopback requests by a T1 channel on a DS3 signal. This
command applies to a T1 channel on a DS3 over channelized SONET interface. The no
version restores the default value, which is to reject remote loopback requests.
pathChannel—Number, in the range 1–2147483648, that identifies the path
ds3Channel—Number, in the range 1–3, that identifies the DS3 channel
t1Channel—One or more individual T1 channels, ranges of T1 channels, or combination
of individual channels and ranges, in the range 1–28 (no spaces); for example,
3,7-15,19-13,27
Controller Configuration
Chapter 4: P Commands
173