Neighbor Next-Hop-Unchanged - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

neighbor next-hop-unchanged

Syntax
Release Information
Description
Options
Mode
48
[ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName }
next-hop-unchanged
Command introduced in JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
Configures BGP to not modify the next hop sent to the BGP peer. Outbound route maps
take precedence over this command, enabling prefixes that match the route map to be
modified, regardless of this command. The no version reenables BGP to modify the next
hop. The default version removes the explicit configuration from the peer or peer group
and reestablishes inheritance of the feature configuration.
ipAddress—IP address of BGP neighbor
ipv6Address—IPv6 address of BGP neighbor
peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using
the peerGroupName argument, all the members of the peer group inherit the
characteristic configured with this command, unless it is overridden for a specific peer.
Address Family Configuration
Copyright © 2010, Juniper Networks, Inc.