Service Config-Monitor-Periodicity - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

service config-monitor-periodicity

Syntax
Release Information
Description
Options
Mode
452
service config-monitor-periodicity time
Command introduced in JunosE Release 9.3.0.
Sets the time of the monitoring task for detecting corruption of a running configuration
on both the primary and the standby SRP. There is no no version.
time—Periodicity value of the monitor task in seconds
Global Configuration
Copyright © 2010, Juniper Networks, Inc.