Ntp Master - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

ntp master

Syntax
Release Information
Description
Options
Mode
102
[ no ] ntp master [ stratumNumber ]
Command introduced before JunosE Release 7.1.0.
Specifies the stratum number of a virtual router you configured as an NTP server. By
default, if the router is configured as an NTP server, the stratum number is set to the
stratum number of the master plus one. The no version restores the default stratum
number.
NOTE: Although you can specify a stratum number of 1, the router does not
support stratum 1 service. The router can synchronize only with an NTP server,
and not directly with an atomic clock or a radio clock.
stratumNumber—Number, in the range 1–15, that indicates how many hops the NTP
server is from an accurate time source, such as a radio clock or atomic clock. Stratum
n servers are n hops from an accurate time source; default value is 8
Global Configuration
Copyright © 2010, Juniper Networks, Inc.