Neighbor Unsuppress-Map - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

neighbor unsuppress-map

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
neighbor { ipAddress | ipv6Address | peerGroupName } unsuppress-map mapTag
no neighbor { ipAddress | ipv6Address | peerGroupName } unsuppress-map [ mapTag ]
Command introduced before JunosE Release 7.1.0.
ipv6Address variable added in JunosE Release 8.0.0.
Restores the advertisement of routes suppressed by policy-based route flap dampening.
The no version restores the default values.
ipAddress—IP address of BGP neighbor
ipv6Address—IPv6 address of BGP neighbor
peerGroupName—Name of a BGP peer group. If you specify a BGP peer group by using
the peerGroupName argument, all the members of the peer group inherit the
characteristic configured with this command. You cannot override the characteristic
for a specific member of the peer group.
mapTag—Name of the route map; a string of up to 32 alphanumeric characters
Address Family Configuration, Router Configuration
Chapter 2: N Commands
67