JunosE 11.3.x Command Reference Guide N to Z
radius trap no-acct-server-responding
Syntax
Release Information
Description
Options
Mode
350
radius trap no-acct-server-responding { enable | disable }
no radius trap no-acct-server-responding
Command introduced before JunosE Release 7.1.0.
Enables or disables SNMP traps when all the configured RADIUS accounting servers per
VR fail to respond to a RADIUS accounting request. The no version restores the default,
disable.
enable—Specifies the feature
disable—Disables the feature; this is the default setting
Global Configuration
Copyright © 2010, Juniper Networks, Inc.