Address-Family - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

For e series broadband services routers - command reference a to m
Table of Contents

Advertisement

address-family

For BGP:
Syntax
[ no ] address-family { { ipv4 | ipv6 } [ unicast | multicast
| [ unicast ] vrf vrfName ] |
{ vpnv4 | vpnv6 } [ unicast ] | l2vpn [ signaling ] | route-target [ signaling ] |
vpls vplsName | vpws vpwsName }
For IS-IS:
[ no ] address-family ipv6 [ unicast | multicast | unicast multicast ]
For RIP:
[ no ] address-family ipv4 [ unicast ] vrf vrfName
Command introduced before JUNOSe Release 7.1.0.
Release Information
l2vpn and signaling keywords added in JUNOSe Release 7.1.0.
vpls keyword and vplsName variable added in JUNOSe Release 7.1.0.
vpws keyword and vpwsName variable added in JUNOSe Release 8.1.0.
route-target signaling keywords and IS-IS IPv6 version added in JUNOSe
Release 8.2.0.
For BGP, configures the router to exchange addresses for the specified address family.
Description
This command takes effect immediately.
For IS-IS, configures IS-IS to exchange IPv6 addresses.
For RIP, configures RIP in a specific VRF to exchange IPv4 addresses.
For all routing protocols, the no version removes the address family.
For the IPv4 address family, configures the router or a specific VRF to exchange
IPv4 addresses in unicast, multicast, or VPN mode.
For the IPv6 address family, configures the router or a specific VRF to exchange
IPv6 addresses in unicast, multicast, or VPN mode.
For the L2VPN address family, configures a router to exchange layer 2 NLRI for
all VPLS instances and all L2VPN (VPWS) instances.
For the VPLS address family, configures the router to exchange layer 2 NLRI for
the VPLS address family for a specified VPLS instance.
For the VPWS address family, configures the router to exchange layer 2 NLRI
for the VPWS address family for a specified L2VPN (VPWS) instance.
For the route-target address family, configures the router to exchange route-target
membership NLRI (RT-MEM-NLRI) that includes information about membership
in VPN route-target extended communities.
Chapter 2: A Commands
95
address-family

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.1.x

Table of Contents