Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual page 138

JUNOSe 11.1.x Command Reference Guide A to M
Options
Router Configuration
Mode
Related Topics
96
address-family
ipv4 Specifies sessions that carry standard IPv4 address prefixes (default)
ipv6 Specifies sessions that carry IPv6 address prefixes
multicast Specifies multicast prefixes
unicast Specifies unicast prefixes (default)
vrfName Name of the VRF; string of 1–32 alphanumeric characters
vpnv4 Specifies sessions that carry customer VPN-IPv4 prefixes, each of which
has been made globally unique by adding an 8-byte route distinguisher
vpnv6 Specifies sessions that carry customer VPN-IPv6 prefixes, each of which
has been made globally unique by adding an 8-byte route distinguisher
l2vpn Specifies sessions that carry L2VPN reachability information
l2vpn signaling Specifies BGP signaling of L2VPN reachability information;
currently, you can omit the signaling keyword with no adverse effects
route-target Specifies sessions that carry route-target membership information
route-target signaling Specifies BGP signaling of route-target membership
information; currently, this can be omitted with no adverse effects
vplsName Name of a VPLS instance for which you are specifying the L2VPN
address family; must be issued for each separate VPLS instance
vpwsName Name of a layer 2 VPN (VPWS) instance for which you are specifying
the L2VPN address family; must be issued for each separate L2VPN instance
Configuring BGP Signaling for L2VPNS and Configuring BGP Signaling for VPLS in
the JUNOSe BGP and MPLS Configuration Guide