Ipv6 Ospf Area - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
ipv6 ospf area
Syntax
Release Information
Description
Options
Mode
1072
[ no ] ip ospf [ processId ] area { areaId | areaIdInt }
Command introduced before JunosE Release 7.1.0.
Creates an OSPFv3 interface under the specified area ID or moves an OSPFv3 interface
from its current area to a specified area. The no version removes the interface from the
specified area.
processId—Integer in the range 1–65535
areaId—OSPF area ID in IP address format
areaIdInt—OSPF area ID as a decimal value 0–4294967295
Interface Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
