Ipv6 Ospf Area - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

ipv6 ospf area

Syntax
Release Information
Description
Options
Mode
1074
[ no ] ip ospf [ processId ] area { areaId | areaIdInt }
Command introduced before JunosE Release 7.1.0.
Creates an OSPFv3 interface under the specified area ID or moves an OSPFv3 interface
from its current area to a specified area. The no version removes the interface from the
specified area.
processId—Integer in the range 1–65535
areaId—OSPF area ID in IP address format
areaIdInt—OSPF area ID as a decimal value 0–4294967295
Interface Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.