Display Ipv6-Acl-Template; Display Packet-Filter - H3C s3100 series Command Manual

Field
Remaining Number
Start Port Name
End Port Name

display ipv6-acl-template

Syntax
display ipv6-acl-template
View
Any view
Parameter
None
Description
Use the display ipv6-acl-template command to display the IPv6 ACL template configuration
information.
Only S3100-EI Series Ethernet switches support this command.
Example
# Display the IPv6 ACL template configuration information.
<Sysname> display ipv6-acl-template
Ipv6 acl template : src-ip dest-ip

display packet-filter

Syntax
display packet-filter { global | interface interface-type interface-number | port-group [ group-id ] |
unitid unit-id | vlan [ vlan-id ] }
View
Any view
Parameter
global: Displays information about global packet filtering.
interface interface-type interface-number: Displays information about packet filtering on the port
specified by interface-type and interface-number.
Number of remaining resources
Start port number and end port number corresponding to the entry
1-5
Description