Display Ipsec { Ipv6-Policy-Template | Policy-Template - H3C MSR Series Command Reference Manual

display ipsec { ipv6-policy-template | policy-template }

Use display ipsec { ipv6-policy-template | policy-template } to display information about IPsec
policy templates.
Syntax
display ipsec { ipv6-policy-template | policy-template } [ template-name [ seq-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-policy-template: Displays information about IPv6 IPsec policy templates.
policy-template: Displays information about IPv4 IPsec policy templates.
template-name: Specifies an IPsec policy template by its name, a case-insensitive string of 1 to 63
characters.
seq-number: Specifies an IPsec policy template entry by its sequence number in the range of 1 to
65535.
Usage guidelines
If you do not specify any parameters, this command displays information about all IPsec policy
templates.
If you specify an IPsec policy template name and a sequence number, this command displays
information about the specified IPsec policy template entry. If you specify an IPsec policy template
name without any sequence number, this command displays information about all IPsec policy
template entries with the specified name.
Examples
# Display information about all IPv4 IPsec policy templates.
<Sysname> display ipsec policy-template
-----------------------------------------------
IPsec Policy Template: template
-----------------------------------------------
---------------------------------
Sequence number: 1
---------------------------------
Description: This is policy template
Traffic Flow Confidentiality: Disabled
Security data flow :
Selector mode: standard
Local address:
IKE profile:
IKEv2 profile:
Remote address: 162.105.10.2
Transform set:
IPsec SA local duration(time based): 3600 seconds
testprop
516