Protocol-Based Vlan Configuration Task List; Configuring A Protocol Template For A Protocol-Based Vlan - H3C S3100 Series Operation Manual

H3c s3100 series ethernet switches operation manual
Hide thumbs Also See for S3100 Series:
Table of Contents

Advertisement

Protocol-Based VLAN Configuration Task List

Complete these tasks to configure protocol-based VLAN:

Configuring a Protocol Template for a Protocol-Based VLAN

Associating a Port with a Protocol-Based VLAN
Displaying Protocol-Based VLAN Configuration
Configuring a Protocol Template for a Protocol-Based VLAN
Configuration prerequisites
Create a VLAN before configuring the VLAN as a protocol-based VLAN.
Configuration procedure
Follow these steps to configure the protocol template for a VLAN:
To do...
Enter system view
Enter VLAN view
Configure the protocol
template for the VLAN
When configuring a protocol template for a protocol-based VLAN, use the at, ip or ipx keyword to
configure a standard template to match AppleTalk, IP, and IPX packets respectively, and use the mode
keyword to configure a user-defined template.
Task
Use the command...
system-view
vlan vlan-id
protocol-vlan [ protocol-index ] { at | ip | ipx
{ ethernetii | llc | raw | snap } | mode
{ ethernetii etype etype-id | llc dsap dsap-id
ssap ssap-id | snap etype etype-id } }
2-9
Remarks
Required
Required
Optional
Remarks
Required
By default, no protocol
template is configured for
the VLAN.

Advertisement

Chapters

Table of Contents
loading

Table of Contents