Ipv6 Nd Ns Retrans-Timer; Ipv6 Nd Nud Reachable-Time - H3C S7500E Series Command Manual

Command Manual – IPv6 Configuration
H3C S7500E Series Ethernet Switches

1.1.27 ipv6 nd ns retrans-timer

Syntax
ipv6 nd ns retrans-timer value
undo ipv6 nd ns retrans-timer
View
Interface view
Parameters
value: Interval for sending NS messages in milliseconds, in the range of 1,000 to
4,294,967,295.
Description
Use the ipv6 nd ns retrans-timer command to set the interval for sending NS
messages. The local interface sends NS messages at intervals of this value.
Furthermore, the Retrans Timer field in RA messages sent by the local interface is
equal to this value.
Use the undo ipv6 nd ns retrans-timer command to restore the default interval.
By default, the local interface sends NS messages at intervals of 1,000 milliseconds
and the Retrans Timer field in RA messages sent by the local interface is 0.
Examples
# Specify VLAN-interface 100 to send NS messages at intervals of 10,000
milliseconds.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 nd ns retrans-timer 10000

1.1.28 ipv6 nd nud reachable-time

Syntax
ipv6 nd nud reachable-time value
undo ipv6 nd nud reachable-time
View
Interface view
Parameters
value: Neighbor reachable time in milliseconds, in the range of 1 to 3,600,000.
Chapter 1 IPv6 Basics Configuration Commands
1-31