Ip Address; Name - H3C S5120-SI Series Command Reference Manual

[Sysname] vlan 2
[Sysname-vlan2] quit
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2]

ip address

Syntax
ip address ip-address { mask | mask-length }
undo ip address [ ip-address { mask | mask-length } ]
View
VLAN interface view
Default Level
2: System level
Parameters
ip-address: IP address to be assigned to the current VLAN interface, in dotted decimal format.
mask: Subnet mask in dotted decimal notation.
mask-length: Subnet mask length, the number of consecutive ones in the mask. The value range is 0 to
32.
Description
Use the ip address command to assign an IP address and subnet mask to a VLAN interface.
Use the undo ip address command to remove the IP address and subnet mask for a VLAN interface.
By default, no IP address is assigned to any VLAN interface.
Related commands: display ip interface (IP Address Commands).
Examples
# Specify the IP address as 1.1.0.1, the subnet mask as 255.255.255.0 for VLAN-interface 1.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] ip address 1.1.0.1 255.255.255.0

name

Syntax
name text
undo name
View
VLAN view
1-6