Display Atm Interface - H3C MSR 20-20 Command Reference Manual

294 C 19: ATM C
HAPTER

display atm interface

Syntax
View
Parameter
Description
Example
C
ONFIGURATION OMMANDS
Table 23 Description on the fields of the display atm class command
Field
Service ubr 8000
encapsulation aal5snap
display atm interface [ atm interface-number ]
Any view
interface-number: Specifies an ATM interface to view the detailed information
about.
Use the display atm interface
ATM interface.
Note that:
If you provide the interface-number argument, this command displays the
information about the ATM interface identified by the argument.
If you do not provide the argument, this command displays the information about
all the ATM interfaces.
# Display the information about ATM 4/0 interface.
<Sysname> display atm interface atm 4/0
ATM interface Atm4/0, State UP
Port Information:
Maximum VCs: 1024
PVCs: 5, MAPs: 1
input pkts: 11603, input bytes: 426476, input pkt errors: 37092
output pkts: 14053, output bytes: 519106, output pkt errors: 0
Main interface Information:
PVCs: 4, MAPs: 1
input pkts: 11603, input bytes: 426476, input pkt errors: 19210
output pkts: 14053, output bytes: 519106, output pkt errors: 0
ATM interface Atm4/0.1, point-to-point, State UP
Sub-interface Information:
PVCs: 1, MAPs: 0
input pkts: 0, input bytes: 0, input pkt errors: 17880
output pkts: 0, output bytes: 0, output pkt errors: 0
Table 24 Description on the fields of the display atm interface command
Field
ATM interface Atm6/0/0, State UP
Maximum VCs
Description
The PVC's service type and the bit rate
The type of ATM AAL5 encapsulation of the PVC is
aal5snap.
command to display detailed information about
Description
Name and state of the interface
Maximum number of VCs on the ATM
interface