Display Atm Pvc-Info - H3C MSR 20-20 Command Reference Manual

display atm pvc-info

Syntax
View
Parameter
Description
Example
Table 26 Description on the fields of the display atm pvc-group command
Field
ENCAP
PROT
INTERFACE
GROUP
display atm pvc-info [ interface interface-type interface-number [ pvc { pvc-name
[ vpi/vci ] | vpi/vci } ] ]
Any view
interface-type interface-number: Interface type and number.
pvc-name: PVC name, a unique string of 1 to 16 characters on ATM interface, not
case-sensitive. The name cannot be the same as a valid VPI/VCI value pair. For
example, the name 1/20 is not allowed.
vpi/vci: VPI/VCI pair. VPI is short for virtual path identifier; its value ranges from 0
to 255. VCI is short for virtual channel identifier; its value range varies by interface
type. Normally, VCI values from 0 to 31 are reserved for special purpose, you are
not recommended to use them. For details regarding the value range, refer to
Table 28.
Use the
display atm pvc-info
Note that:
Without an interface specified, the system displays PVC information on all ATM
■
interfaces.
Without a PVC name or a VPI/VCI value pair specified, the system displays all
■
the PVC information on the specified ATM interface.
# Display the PVC information on all ATM interfaces.
<Sysname> display atm pvc-info
VPI/VCI | STATE | PVC-NAME
--------|---------|-----------|--------|--------|------|----------
1/32 |UP |aa
1/33 |UP |Sysname
1/55 |UP |datacomm
2/66 |UP |
2/101 |UP |beijing
Table 27 Description on the fields of the display atm pvc-info command
Field
VPI/VCI
STATE
Description
AAL5 encapsulation type of the PVC
Upper protocol running on the PVC
Interface to which the PVC belongs
PVC group to which the PVC belongs
command to view the information about PVC.
| INDEX | ENCAP | PROT | INTERFACE
|33 |SNAP |IP
|34 |MUX |None
|56 |SNAP |PPP
|68 |SNAP |IP
|103 |SNAP |ETH
Description
VPI/VCI value pair
PVC state
297
|Atm1/0 (UP)
|Atm1/0 (UP)
|Atm1/0.1 (UP)
|Atm1/0.4 (UP)
|Atm1/0.2 (UP)