Atm-Link Check; Clock - H3C MSR 20-20 Command Reference Manual

292 C 19: ATM C
HAPTER
Related command:
Example

atm-link check

Syntax
View
Parameter
Description
Example

clock

Syntax
View
Parameter
C
ONFIGURATION OMMANDS
atm class.
# Apply the ATM class named "main" to ATM 1/0 interface.
<Sysname> system-view
[Sysname] interface atm 1/0
[Sysname-Atm1/0] atm-class main
atm-link check
undo atm-link check
ATM P2P sub-interface view
None
Use the
atm-link check
sub-interface change depending on whether the physical interface is up and
whether a PVC is configured on the sub-interface. The protocol of the
sub-interface, which comes down otherwise, goes up when the physical interface
is up and a PVC is configured on the sub-interface.
Use the undo atm-link check
By default, the protocol of the ATM P2P sub-interface goes up or comes down
depending on whether the physical interface is up or down.
This command applies only to ATM P2P sub-interfaces.
# Enable the protocol state of ATM P2P sub-interface 4/0.1 to change depending
on whether the physical interface is up and whether a PVC is configured on the
sub-interface.
<Sysname> system-view
[Sysname] interface atm 4/0.1 p2p
[Sysname-Atm4/0.1] atm-link check
clock { master | slave }
undo clock
ATM main interface view
master: Specifies the internal transmission clock.
slave: Specifies the line clock.
command to have the protocol state of the ATM P2P
command to restore the default.