Display Atm Pvc-Group - H3C MSR 20-20 Command Reference Manual

296 C 19: ATM C
HAPTER

display atm pvc-group

Syntax
View
Parameter
Description
Example
C
ONFIGURATION OMMANDS
Table 25 Description on the fields of the display atm map-info command
Field
IP & Mask
State UP
100.11.1.1, mask 255.255.0.0
Vlink 1
display atm pvc-group [ interface interface-type interface-number [ pvc { pvc-name
[ vpi/vci ] | vpi/vci } ] ]
Any view
interface-type interface-number: Interface type and interface number.
pvc-name: PVC name, a unique string of 1 to 16 characters on ATM interface, not
case-sensitive. The name cannot be the same as a valid VPI/VCI value pair. For
example, the name 1/20 is not allowed.
vpi/vci: VPI/VCI pair. VPI is short for virtual path identifier; its value ranges from 0
to 255. VCI is short for virtual channel identifier; its value range varies by interface
type. Normally, VCI values from 0 to 31 are reserved for special purpose, you are
not recommended to use them. For details regarding the value range, refer to
Table 28.
Use the
display atm pvc-group
PVC-Group.
Note that:
If no interface is specified, the system displays PVC-Group information on all
■
ATM interfaces.
If the PVC name or the VPI/VCI value pair is not specified, the system displays
■
information of all PVC-Groups on the specified ATM interface.
# Display the information about PVC-Group on all ATM interfaces.
<Sysname> display atm pvc-group
VPI/VCI PVC-NAME
1/32 aa
1/33
3/34
Table 26 Description on the fields of the display atm pvc-group command
Field
VPI/VCI
PVC-NAME
STATE
Description
Protocol type
Map entry state
Protocol address
Virtual link number
command to view the information about
STATE ENCAP PROT
UP SNAP IP
UP SNAP IP
UP SNAP IP
Description
VPI/VCI value pair
PVC name
PVC state
INTERFACE
Atm11/0(UP)
Atm11/0(UP)
Atm11/0(UP)
GROUP
1/32
1/32
1/32