Display Ike Sa - H3C MSR 20-20 Command Reference Manual

Description
Related command:
Example

display ike sa

Syntax
View
Parameter
Description
Related command:
Use the
display ike proposal
proposals.
This command displays the configuration information of all IKE proposals in the
descending order of proposal priorities.
authentication-method on page 1721, ike proposal, encryption-algorithm
on page 1725, authentication-algorithm on page 1721, dh, sa duration.
# Display the settings of IKE proposals.
<Sysname> display ike proposal
priority authentication authentication encryption Diffie-Hellman duration
method
--------------------------------------------------------------------------
10 PRE_SHARED
11 PRE_SHARED
default PRE_SHARED
Table 571 Description on the fields of the display ike proposal command
Field
priority
authentication method
authentication algorithm
encryption algorithm
Diffie-Hellman group
duration (seconds)
display ike sa [ verbose [ connection-id connection-id | remote-address
remote-address ] ]
Any view
verbose: Displays detailed information.
connection-id: Displays detailed information about IKE SAs by connection ID, in
the range 1 to 2000000000.
remote-address: Displays detailed information about IKE SAs by remote address.
Use the
display ike sa
SAs.
Note that the command displays brief information about the current IKE SAs if you
specify no parameters or keywords.
ike proposal, ike peer (system view).
command to display the settings of all IKE
algorithm algorithm
SHA DES_CBC
MD5 DES_CBC
SHA DES_CBC
Description
Priority of the IKE proposal
Authentication method used by the IKE proposal
Authentication algorithm used by the IKE proposal
Encryption algorithm used by the IKE proposal
DH group used in IKE negotiation in phase 1
ISAKMP SA lifetime of the IKE proposal in seconds
command to display information about the current IKE
2157
group (seconds)
MODP_1024 5000
MODP_768 50000
MODP_768 86400