Display Ike Dpd - H3C MSR 20-20 Command Reference Manual

Description
Related command:
Example

display ike dpd

Syntax
View
Parameter
Description
Related command:
Example
group5: Uses the 1536-bit Diffie-Hellman group for key negotiation in phase 1.
group14: Uses the 2048-bit Diffie-Hellman group for key negotiation in phase 1.
Use the command to specify the DH group to be used in key negotiation phase
dh
1 for an IKE proposal.
Use the command to restore the default.
undo dh
By default, group1, the 768-bit Diffie-Hellman group, is used.
ike proposal, display ike proposal.
# Specify 768-bit Diffie-Hellman for IKE proposal 10.
<Sysname> system-view
[Sysname] ike proposal 10
[Sysname-ike-proposal-10] dh group1
display ike dpd [ dpd-name ]
Any view
dpd-name: DPD name, a string of 1 to 15 characters.
Use the
display ike dpd
DPDs.
ike dpd.
# Display information about all DPDs.
<Sysname> display ike dpd
---------------------------
IKE dpd: dpd1
references: 1
interval-time: 10
time_out: 5
---------------------------
Table 569 Description on the fields of the display ike dpd command
Field
references
Interval-time
time_out
command to display information about a specified or all
Description
Number of IKE peers referencing the DPD
DPD query triggering interval in seconds
DPD packet retransmission interval in seconds
2155