5 Repair
5.4.2 Replacing the housing
Continued
Removing the housing cover and insert (-10/1.52 and -12/1.27)
1
2
3
4
Continues on next page
534
Action
CAUTION
Make sure that all supplies for electrical power
are turned off.
Remove the cover by removing the screws.
CAUTION
Valid for CRB 15000-5/0.95
There is cabling connected between the cover
and the joint unit drive board.
Open the cover with care to avoid damage to the
cabling or the connector(s).
Do not leave the cover in location without being
secured with the attachment screws.
Remove the insert.
© Copyright 2021 - 2023 ABB. All rights reserved.
Note
xx2300000833
xx2300000834
Product manual - CRB 15000
3HAC077389-001 Revision: L