ABB CRB 15000 Product Manual page 680

5 Repair
5.5.1 Replacing the base
Continued
Refitting the base (-5/0.95)
Use these procedures to refit the base.
Refitting the brake release unit
1
2
Refitting the base cabling
1
Continues on next page
680
Action
Wipe, lubricate and fit the o-ring to its groove.
Replace if damaged.
Refit the brake release unit to the new base with
the screws.
Action
Insert the cabling into the base.
© Copyright 2021 - 2023 ABB. All rights reserved.
Note
O-ring: 3HAB3772-119
Grease: 3HAC031695-001
Harmonic Grease 4B No.2
Used to lubricate the seals.
xx2100000423
Base: 3HAC073922-001
Screws: M3x5 12.9 Lafre
2C2B/FC6.9 (4 pcs)
Tightening torque: 0.45 Nm.
xx2100000413
Note
xx2100000408
Product manual - CRB 15000
3HAC077389-001 Revision: L