ABB CRB 15000 Product Manual page 278

Hide thumbs Also See for CRB 15000:

Table of Contents

5.3.2 Replacing the axis-1 cabling

Refitting the base cover (-10/1.52 and -12/1.27)

Securing the base

Continues on next page

Wipe, lubricate and fit the o-ring to its groove.

Replace if damaged.

Refit the bottom cover with the attachment screws.

For CRB 15000-5/0.95, fit the cover in correct dir-

ection, the protrusion of the cover must face out-

Lift the base to standing and secure it to the

foundation with the attachment screws and

3HAC061327-072

Grease: 3HAC042536-001 (Shell

xx2000002016

Hex socket head cap screw: M3x8

12.9 Lafre 2C2B/FC6.9 (8 pcs)

Tightening torque: 1.4 Nm.

xx2300000760

Attachment screws: M10x35 8.8 (4

Washers: 23/10.5/2.5 mm Steel (4

Tightening torque: 32 Nm ±10%.

xx2000002006

Product manual - CRB 15000

3HAC077389-001 Revision: L

Troubleshooting