ABB CRB 15000 Product Manual page 442

5 Repair
5.3.6 Replacing the axis-5 cabling
Continued
5
6
Continues on next page
442
Action
Place the cabling at the slot before refitting the
joint unit.
Fit the joint unit to the tilt, aligning the pin with the
pin hole.
CAUTION
The connectors and the joint unit cables are
sensitive to mechanical damage. Handle the as-
sembly with care.
© Copyright 2021 - 2023 ABB. All rights reserved.
Note
xx2100000041
xx2100000285
xx2000002142
Product manual - CRB 15000
3HAC077389-001 Revision: L