ABB CRB 15000 Product Manual page 294

5 Repair
5.3.3 Replacing the axis-2 cabling
Continued
Removing the lower arm covers (-5/0.95)
1
2
3
4
Continues on next page
294
Action
CAUTION
Make sure that all supplies for electrical power
are turned off.
Remove the four lower arm cover screws.
Remove the cover by inserting a small flat
screwdriver to snap open the locks at each end
of the cover.
Remove the inner cover by removing the four
screws.
© Copyright 2021 - 2023 ABB. All rights reserved.
Note
xx2000001929
xx2100000267
xx2000001930
Product manual - CRB 15000
3HAC077389-001 Revision: L