6
7
8
Connecting the cabling between the lower arm and swing
1
Product manual - CRB 15000
3HAC077389-001 Revision: L
Action
Remove the guide pins and fasten the remaining
two screws.
Torque tighten all screws crosswise.
Refit the cable bracket with the four screws.
Action
Connect the connectors to each other and snap
them to the cable holders.
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.4.1 Replacing the lower arm
Continued
Note
Hex socket head cap flange screw:
M4x25 12.9 Lafre
2C2B/FC6.9+PrO-COat111 (16 pcs)
xx2000001967
Tightening torque: 4.6 Nm
Hex socket head cap screw: M3x8
12.9 Lafre 2C2B/FC6.9 (4 pcs).
Tightening torque: 0.8 Nm
xx2000001966
Note
xx2000001938
Continues on next page
519